AARP V/s Single Effect LiBr Chiller
Offered By Division T2

The following table gives comparison of AARP V/s LiBr Chillers (Single Effect Lithium Bromide Absorption Refrigeration Chillers) for Chilled Water Application. Hot water driven AARP is a more reliable Absorption System than Single Effect LiBr Chiller for production of chilled water using hot water of temperatures less than 100°C.
AARP Single Effect LiBr Chiller
Application Range
Operating Temp. Range: +5 to -60°C Operating Temp Range: +7 & above
Driving Heat Source Temp Range: 85°C & above. Driving Heat Source Temp Range: 85°C & above
Cooling water Temp: 35°C or below. Cooling water Temp: 35°C or below
Construction
Refrigerant - Ammonia (NH3) Refrigerant - Water
Absorbent - Water Absorbent - Lithium Bromide (LiBr)
Material of Construction Material of Construction
Plates - Carbon Steel Plates - Carbon Steel
Tubes - Carbon Steel Tubes - Copper Nickel Tubes
All welded construction Tubes to tube sheet are expanded joint rest is welded construction
Operating System pressure is above atmosphere upto (-30°C) System is under vacuum
Functioning
Fully automatic continuous Modulation Fully automatic continuous Modulation
Part load efficiency is good Part load efficiency is good
Maintenance & Spares Maintenance & Spares
No Maintenance Vacuum maintenance is critical functions and system life 
Tubes are carbon steel & solution pumps are standard centrifugal pumps. Copper Nickel tubes & Hermetic pumps are very costly 
  Copper Nickel tubes need replacement periodically & hence repair cost is high.
Life
Long life of 25 years or more Entire equipment life is not more than 15 years.
Corrosion
Corrosion is negligible Corrosion is high
Highly susceptible to corrosion and therefore life can be limited if vacuum is not maintained properly. Expanded tube-to-tube sheet joints have tendency to leak periodically.
Due to low corrosion repairs maintenance costs are very low Due to corrosion tube repairs and replacement is frequent. All tubes are Copper or Copper Nickle Tubes. Therefore tube replacement is very costly.
Due to pressurized system; No special care is needed Due to vacuum System; special care is needed otherwise plant stops frequently. Also due to thousand of expanded tube to tube sheet joints, the vacuum loss is frequent with passage of time. Fault finding is very time consuming.
Chilled water application
Chilled water temperature  Chilled water temperature
7°C outlet 7°C outlet
12°C return 12°C return
Cooling water temperature : 30°C Cooling water temperature: 30°C
Driving Heat Sources temperature 85°C to 140°C Driving Heat Source temperature 85°C to 140°C
C.O.P.: 0.6 to 0.65 C.O.P.: 0.6 to 0.65
Visit us at www.tespl.com to know more about our other Products and Services
Quick Inquiry